Table of Contents:

1. Setup

Make sure that tables are set up and covers have been placed on the tables before beginning.

Before you begin, make sure you have everything below:

• 2 centering rings
• Inner tube (Cut for 10 inches)
• Fins
• Shock cord with eye bolts sewn on
• Body tube
• Fin alignment tools (hexagons that are holding up the body tube)
• Rail buttons
• Long wooden sticks/rod (for applying epoxy)
• 5 min epoxy (for the centering rings)

See image below for the desired setup before assembly begins.

2. Rail Buttons and Inner Tube

1. Pick between any of the fin slots.

2. Find the center (for example: if it’s a 3-inch diameter tube, the center would be 1.5 inches).

   

3. Identify and mark where the rail buttons will go on the fuselage (mark with a sharpie).